Flooding can present a significant challenge for homeowners, businesses, and land holders due to the potential for extensive property damage, economic losses, and health risks. Flood waters can infiltrate buildings, causing structural damage, destruction of belongings, and potential health hazards due to contamination from sewage, chemicals, and other hazardous substances. Moreover, standing water can attract insects and rodents, posing further health risks.
The need to pump out water is critical to prevent further damage to properties and minimise health hazards. In recent years, flooding has become more frequent in many parts of New Zealand, emphasizing the importance of being prepared with proper flood prevention and mitigation strategies. This includes maintaining proper drainage systems, regularly checking for leaks or damage, and investing in quality pumping equipment to facilitate prompt water removal in the event of flooding.
What is the best way to pump flood water out of my house?
If your house has been flooded and you need to pump out water, there are several steps you can take to ensure the process is done effectively and safely. Here are some general guidelines to follow:
Ensure safety: Before attempting to pump out any flood water, make sure that the power to your home is turned off to avoid electrocution. Wear rubber boots and gloves to protect yourself from any potential hazards.
Assess the water level: Determine how deep the water is and how much water needs to be removed. This can help you determine the type of pump you need and the amount of time it will take to complete the task.
Choose the right pump system: Select the appropriate type of pump based on the amount of water that needs to be removed, the power source available, and the type of water (clean or contaminated). A submersible dewatering pump is usually the most effective for removing large volumes of water. Varieties include sump pumps, submersible electric water pumps, water transfer pumps and utility pumps. All can provide a fast and effective pumping solution. Trusted brands of water pumps include Grundfos, Pentair, Davey – all available through Think Waters preferred supplier in New Zealand, 43 South. If you are not sure what type of pumping solution to use, speak to one of our team at your nearest Think Water store. We have local knowledge around the quickest way to access the best pump system for your situation and have stores located close to all the recently flooded areas in New Zealand.
Position the pump: Place the pump at the lowest point of the flooded area, preferably in the center of the room or space. Make sure the pump is stable and secure.
Direct the water flow: Position the hose from the pump to direct the water flow away from your home, preferably toward a storm drain or other safe drainage area.
Monitor the pump: Regularly check the pump to make sure it is working properly and that the water is being pumped out efficiently.
Dispose of the water: Dispose of the water in an appropriate and legal manner, depending on the type of water and the local regulations.
It is important to note that pumping out flood water can be a dangerous and difficult task, and it may be best to seek the help of a professional if you are unsure about how to proceed.
What is the best dewatering pump to pump flood water out of my house?
When flooding occurs in your home, basement, business or shed, one of the most effective ways to pump out the water is by using a sump pump. Sump pumps are conventionally used in a sump pit or basin to remove water that has accumulated in the basement or crawlspace, but they are also perfect for flooded rooms or other areas where water is trapped and needs to be removed.
The sump pump works by suctioning the water through a pipe and out of your home, either into a designated drain or outside. The water is then pumped out of your house, allowing you to restore your property to its pre-flood condition, providing an effective pumping solution to dewater your home.
When choosing a sump pump for dewatering purposes, there are several factors to consider, including the type of switch, power source, capacity, quality, and installation process. It is important to choose a sump pump with the right capacity to remove the volume of water present in your space.
Will a sump pump get all the water out of my house?
A sump pump can be an effective tool for removing water from your house, but it may not be able to remove all of the water in some cases. For a sump pump to work, the water needs to be deep enough to submerge the suction portion of the pump. Vertical or pedestal style pumps are perfect for this as they can be easily placed in the water.
While a sump pump can remove the majority of the water, there may still be some water left in your home that the pump cannot remove. In this case, you may need to do some traditional style mopping up for the last little bit. Additionally, you can consider using a dryer or fan to help dry out the remaining water.
What are some of the most popular brands of sump pumps?
When it comes to sump pumps, there are many different brands available on the market. Some of the most popular brands of sump pumps include Grundfos, Davey, and Pentair.
Grundfos is a Danish company that has been manufacturing pumps since 1945. They offer a wide range of sump pumps that are known for their reliability and efficiency. Their pumps are designed to handle large volumes of water and can be used in a variety of applications, including residential and commercial settings.
Davey is an Australian company that has been manufacturing pumps since 1934. They offer a range of sump pumps that are designed to handle both clean and dirty water. Their pumps are known for their durability and reliability, making them a popular choice for homeowners and businesses alike.
Pentair is an American company that offers a range of sump pumps designed to handle both residential and commercial applications. Their pumps are known for their energy efficiency and reliability, and they offer a variety of features such as battery backups and alarms to ensure that your home or business stays protected.
Think Water supplies sump pumps from all three of these manufacturers through our preferred supplier in New Zealand, 43 South.
Let’s take a closer look at some suitable sump pumps for removing flood water:
Pentair Myers DS Series Sump Pumps
These sump pumps are ideal for dewatering flooded basements and rooms, foundations, construction sites, ponds, pits, and tanks.
Davey Vortex Sump Pumps
A Davey all-rounder, the General Purpose Vortex Sump Pumps are able to pump clean or grey water of neutral pH, with some soft or fine solids. Suitable applications include sump emptying, septic effluent disposal, water transfer or pumping of light slurries and flood water.
Grundfos DWK Dewatering Pumps
Designed with an enclosed, semi-open or SuperVortex, free-flow impeller for use in a wide range of building and industrial applications. Range is 0.75-90 kW.
If you are struggling with removing flood water from your property and need our help, contact your Nearest Think Water Store.